This can vastly improve the ergonomics and integration of the handbrake in your simulator.Ī selection of bolts and t-nuts is included with every Sim Handbrake.
Using the yaw adjustment, you can rotate the base so you can optimize the direction into which you pull the lever. This allows you offset the yaw of the handbrake base up to 22,5 degrees. This allows you to easily mount the Sim Handbrake to aluminium profiles (aluminium profiles not included).Īn added advantage of this adapter plate is that it allows you to easily adjust the yaw of the handbrake. The second option is to use the included optional adapter plate. Make sure you have matching mounting holes in the flat surface to which you connect the handbrake base. The first option is to use the 4 mounting holes on the base itself (2 on each side), which allow you to mount the handbrake to a flat surface. The base of the handbrake itself can be mounted in 2 ways. Combined with the option to mount the lever horizontal or vertical you’ll have plenty of options to find a suitable spot for the handbrake in your simulator. The base itself can be mounted in both a horizontal or vertical position. There are multiple options to mount the Sim Handbrake to your simulator. All settings can be saved into profiles, which can be loaded again in a few mouse clicks. These adjustments can be made without having to recalibrate the handbrake (including iRacing). SmartControl allows for instant mapping of (non-linear) output curves, deadzone and handbrake force. The Sim Handbrake comes with a powerful configuration tool allowing you to set up your handbrake in ways not previously possible: SmartControl. A USB cable is supplied with every handbrake in order to connect it to your pc. The system as a whole has passed EMC compliance testing, guaranteeing a stable output signal. The electronics of the handbrake are integrated inside the handbrake base. Using Heusinkveld SmartControl software, you have complete freedom to set custom non-linear output curves. The measurement of the handbrake force is linear. The lever actuates a 120kg load cell, resulting in up to 22kg of actual force measured at the lever. This can greatly enhance the ergonomics of your simulator, allowing you to pull the handbrake straight towards you from a multitude of mounting positions. If you use the included optional adapter plate (which allows for easy mounting onto aluminum profiles), you have up to 22,5 degrees of freedom to set the yaw of the handbrake. Per position there is a fine-tune adjustment up to 26 degrees to set the exact position of the lever. The lever can be set in a horizontal or vertical position. A total of 3 elastomers are provided in order to set a soft, medium or stiff handbrake feeling.
HEUSINKVELD HANDBRAKE MOUNTING SIMULATOR
The main loading on the brake is simulator by compressing the Heusinkveld proprietary elastomers, giving an unprecedented progressive brake feel. You can also remove this initial coil spring if you wish to do so. The travel and preload on this spring are adjustable. An initial metal coil spring simulates the pad-to-disc gap and/or slack on the handbrake cable. The Heusinkveld Sim Handbrake features a wide range of mechanical adjustments to set the handbrake up to your liking.Ī 2-stage spring system provides resistance when pulling the lever.
0 kommentar(er)
